E5X Wiring Guide

1.0 Introduction The E5X MCS T4.1 (“E5X” for short) is an Ethernet controlled 5-Axis Motion Control System powered by a 32-bit Teensy® 4.1. It is an easy-to-use and powerful motion control system that can drive up to 5-axis (+1 clone/slave) CNC machines. The E5X is designed to run grblHAL firmware, which is fast becoming the firmware […]

E5X Wiring Guide Read More »

ESP32 Stepper Motor Controller

An ESP32 based controller for moving a NEMA23 C-Beam XL Actuator. Limit switches on the actuator will reverse the direction of the stepper when contacted. Additional micro push buttons will do the following: 1) Stop; 2) Speed; 3) Reverse. Power will come from a RD-65A power supply with an on-off switch to be mounted on the case. All electronics will be compact and fit within a 300x150mm case. Through-wall connectors will be used to pass cabling through the case.

ESP32 Stepper Motor Controller Read More »