Mean Well Power Supply

Safety Statement

The author of this document is not liable or responsible for any accidents, injuries, equipment damage, property damage, loss of money or loss of time resulting from improper use of electrical or mechanical or software products.

Assembling electrical and mechanical CNC machine components like power supplies, motors, drivers or other electrical and mechanical components involves dealing with high voltage AC (alternating current) or DC (direct current) and other hazardous items which can be extremely dangerous and needs high attention to detail, experience, knowledge of software, electricity, electro-mechanics and mechanics.

BEFORE MAKING ANY CONNECTIONS OR DISCONNECTIONS POWER MUST BE REMOVED FROM THE DEVICE AND THE CONTROLLER. FAILURE TO DO SO WILL VOID ANY AND ALL WARRANTIES.

Before starting please read though all the instructions.

Note : Any Mains power connections must be installed by a Licensed electrician or suitability qualified person.

Errors and omissions excepted

lrs-350-spec.pdf

Mean Well LRS-350 350W AC/DC Single Output Power Supply is a single-output enclosed type power supply with 30mm of low profile design. Adopting an input of 115 VAC or 230 VAC (select by switch). A built-in long life fan allows LRS-350 to work from -30ºC to +70ºC with full load. Delivering an extremely low no load power consumption (less than 0.75W), LRS-350 allows the end system to easily meet the worldwide energy requirement. LRS-350 has complete protection functions and 5G anti-vibration capability.

With the power supply, you would have received a power supply cover. This power supply cover will protect against contact with the mains voltage connections on the power supply. In the bag will be the power supply and an M4 x 10mm button head screw. Please follow the installation instructions below:

Please click the image to expand.

There are 2 variations in general flexible cable (extension cords) here in Australia.. Depending on the manufacture of the cable you purchase this will affect the colours inside your cable. Please refer to the below table for the 2 types of Australian cable.