add_on_packs:spindle_mounting_hardware_pack_2060

Spindle Mounting Hardware Pack (2060)


Safety Statement

The author of this document is not liable or responsible for any accidents, injuries, equipment damage, property damage, loss of money or loss of time resulting from improper use of electrical or mechanical or software products.

Assembling electrical and mechanical CNC machine components like power supplies, motors, drivers or other electrical and mechanical components involves dealing with high voltage AC (alternating current) or DC (direct current) and other hazardous items which can be extremely dangerous and needs high attention to detail, experience, knowledge of software, electricity, electro-mechanics and mechanics.

Before starting please read though all the instructions.

The following diagrams are valid for assembly of all size Spindle Mounting Brackets, including 52mm, 65mm, 71mm and 80mm.

  • 4 x 90 Degree Angle Corner Connector
  • 4 x M5 Drop In Tee Nut
  • 4 x M5-Low Profile Screw-20mm
  • 4 x M5-Low Profile Screw-10mm
  • 4 x Aluminium Spacers-3mm
  • 4 x Three Hole Joining Plates
  • 1 x Router Mount
  • 1 x Router Mount Front


This guide will show you how to assemble the 2060 Spindle Mounting Hardware Pack. Please note that this kit is for the OX mechanical kit or any machine with a 2060 profile on the Z axis.

  • Please put the corner connectors in the middle mounting holes, not the outer ones as shown below:


  • Use the provided 10mm screws to insert the 90 degree corner brackets into the spindle mount.


  • Insert the 20mm screws that will attach the bracket into the Z axis extrusion. Please also insert the 3mm spacers in this step.


  • Add the 3 hole mounting plates to provide the clearance for the spindle mount.


  • Lastly, please add the drop in tee nuts. Your spindle mount is now ready to mount onto the Z axis actuator on your Ox CNC.


  • Complete!

  • add_on_packs/spindle_mounting_hardware_pack_2060.txt
  • Last modified: 2020/09/08 23:18
  • by Maker Hardware Team